Command operation
- Use the showdomainmode(8) command to specify automatic boot.
XSCF> showdomainmode -d 0
Host-ID :0f010f10
Diagnostic Level :max
Secure Mode :on
Autoboot :on
CPU Mode :auto
Use the setdomainmode(8) command to disable automatic boot.
Disable automatic boot for domain ID 0.
XSCF> setdomainmode -d 0 -m autoboot=off
Diagnostic Level :max -> —
Secure Mode :on -> —
Autoboot :on -> off
CPU Mode :auto -> —
The specified modes will be changed.
Continue? [y|n]:y
configured.
Diagnostic Level :max
Secure Mode :on (host watchdog: available Break-signal:non-receive)
Autoboot :off (autoboot:off)
CPU Mode :auto
- Use the showdomainmode(8) command to confirm that autoboot is off. Also, to
apply the setting to the domain, restart the domain.
