| Command | Description |
|---|---|
| adduser | Creates an XSCF user account. |
| deleteuser | Deletes an XSCF user account. |
| disableuser | Disables an XSCF user account |
| enableuser | Enables an XSCF user account. |
| showuser | Displays XSCF user account information. Alternatively, it displays the user’s own user account information. |
| password | Changes an XSCF user account password. Alternatively, it changes the user’s own XSCF user account password. |
| setpasswordpolicy | Configures the XSCF password policy. |
| showpasswordpolicy | Displays the XSCF password policy. |
| setprivileges | Assigns user privileges. |
| setloginlockout | Configures the lockout of user accounts. |
| showloginlockout | Displays the lockout setting of user accounts. |
| setnetwork | Configures the XSCF network. |
| shownetwork | Displays the XSCF network settings and XSCF-LAN network status. |
| setroute | Configures the XSCF-LAN route. |
| showroute | Displays XSCF-LAN route settings. |
| sethostname | Specifies the XSCF-LAN host name and domain name. |
| showhostname | Displays the XSCF-LAN host name and domain name. |
| setnameserver | Sets the XSCF name servers (DNS servers) and the search paths. |
| shownameserver | Displays the XSCF name servers and the search paths. |
| applynetwork | Applies the network settings. |
| setdscp | Configures DSCP. |
| showdscp | Displays the DSCP settings. |
| nslookup | Checks for the name resolution of a host name. |
| ping | Checks the response for a host. |
| traceroute | Displays the network path to the host by list. |
| setpacketfilters | Sets the IP packet filtering rules to be used in the XSCF network. |
| showpacketfilters | Displays the IP packet filtering rules that are set in the XSCF network. |
| settimezone | Specifies the time zone. |
| showtimezone | Displays the time zone setting. |
| setdate | Sets the XSCF time. |
| showdate | Displays the XSCF time. |
| setntp | Configures the NTP server. |
| showntp | Displays the NTP server setting. |
| resetdateoffset | Resets the time subtraction between the XSCF and the domain. |
| showdateoffset | Displays the time subtraction between the XSCF and the domain. |
| setssh | Configures SSH. Generates RSA and DSA keys for SSH2 host authentication. |
| showssh | Displays the SSH settings and fingerprint. |
| settelnet | Configures telnet. |
| showtelnet | Displays the telnet settings. |
| setautologout | Sets the session timeout time of the XSCF Shell. |
| showautologout | Displays the session timeout time of the XSCF Shell. |
| setsmtp | Configures the SMTP server. |
| showsmtp | Displays the the SMTP server settings. |
| setemailreport | Configures mail notification. |
| showemailreport | Displays the mail notification settings. |
| setlookup | Enables or disables the use of an LDAP server for authentication and user privilege lookup. |
| showlookup | Displays information about whether an LDAP server is used for authentication and user privilege lookup. |
| setldap | Configures LDAP client settings. |
| showldap | Displays LDAP client settings. |
| setad | Configures Active Directory client settings. |
| showad | Displays Active Directory client settings. |
| setldapssl | Configures LDAP/SSL client settings. |
| showldapssl | Displays LDAP/SSL client settings. |
| sethttps | Configures the https settings. |
| showhttps | Displays the https settings. |
| setupplatform | Sets up platform-specific settings. Note: In the platform-specific settings, the following items can be optionally configured. Each item is the same as the setting of Chapter 2.User Account settingsXSCF Network SettingsInternal DSCP NetworkDomain Name ServiceNetwork Time ProtocolSSHHTTPS ServerEmail Reports |
| setarchiving | Configures the log archiving function of XSCF. |
| showarchiving | Displays the settings of the log archiving function of XSCF. |
| setaudit | Configures the auditing of XSCF. |
| showaudit | Displays the settings of the audit of XSCF. |
| viewaudit | Displays the audit records (Audit trail) of XSCF. |
| setsnmp | Configures the SNMP Agent. |
| showsnmp | Displays the SNMP Agent settings. |
| setsnmpusm | Configures the USM management information for the SNMP agent. |
| showsnmpusm | Displays the USM management information for the SNMP agent. |
| setsnmpvacm | Configures the VACM management information for the SNMP agent. |
| showsnmpvacm | Displays the VACM management information for the SNMP agent. |
| setsunmc | Start or stop the Sun Management Center agent and make changes to its configuration. |
| showsunmc | Show setup information and status of Sun Management Center agent. |
| setdcl | Specifies the domain configuration information (DCL). |
| showdcl | Displays the domain configuration information. |
| showboards | Displays the component information and the COD information about a system board. |
| showdevices | Displays the domain information specified for a system board. |
| showdomainstatus | Displays the domain status. |
| setupfru | Specifies the number of XSB partitions of the system board and sets the memory mirror mode. |
| showfru | Displays the specified number of XSB partitions of the system board and the memory mirror mode that is set. |
| testsb | Diagnoses the system board. |
| addboard | Adds a system board to a domain. |
| deleteboard | Deletes a system board from a domain. Alternatively, it reserves a delete to the system board. If the deletion is reserved, the deletion is done after Oracle Solaris OS reboot. |
| moveboard | Moves a system board to another domain. Alternatively, it reserves a move to the system board. If the movement is reserved, the deletion is done after Oracle Solaris OS reboot of source domain, and the assignment to the new domain is done. |
| replacefru | Replaces a CPU/Memory Board unit, I/O unit, fan unit, PSU, or XSCF Unit in work performed according to the applicable guide. |
| addfru | Installs a CPU/Memory Board unit, I/O unit, fan unit, or PSU in work performed according to the applicable guide. |
| deletefru | Removes a CPU/Memory Board unit or I/O unit in work performed according to the applicable guide. |
| setdomainmode | Sets a hardware initial diagnostic level (No, standard, maximum).Enables or disables break signal sending, host watchdog, automatic boot, and sets CPU operation mode. |
| showdomainmode | Displays the domain host ID, the hardware initial diagnostic level, information of enabled or disabled status on break signal sending, Host watchdog, automatic boot, and displays CPU operation mode, ethernet address (mac address). |
| sendbreak | Sends a break signal to the server. |
| showresult | Displays the exit status of the most recently executed command. |
| setlocale | Sets locale. |
| showlocale | Displays locale. |
| setaltitude | Sets altitude. |
| showaltitude | Displays altitude. |
| cfgdevice | Sets the connection destination of the DVD drive unit and tape drive unit. Displays the setting status information. |
| console | Connects to a domain console. |
| showconsolepath | Displays the operating status of the main console. |
| showenvironment | Displays the temperature, humidity, voltage, fan rotation speed, power consumption, and exhaust airflow. |
| showstatus | Lists degraded components. |
| showhardconf | Displays all components mounted in the server. |
| poweron | Turns on power to all domains or the specified domain. |
| poweroff | Turns off power to all domains or the specified domain. |
| reset | Resets the specified domain.Note: The following three reset modes are available:por: Domain system resetrequest: Domain panic instructionxir: Domain CPU reset |
| setpowerupdelay | Sets the warm-up time and the air-conditioning wait time. |
| showpowerupdelay | Displays the warm-up time and the air-conditioning wait time settings. |
| setshutdowndelay | Sets the UPS shutdown delay time at power failure. |
| showshutdowndelay | Displays the UPS shutdown delay time at power failure. |
| setdualpowerfeed | Sets the dual power feed. |
| showdualpowerfeed | Displays the dual power feed. |
| setlocator | Enables or disables the CHECK LED blinking. |
| showlocator | Displays the LED status. |
| switchscf | Switches the XSCF Unit state (Active/Standby). |
| ioxadm | Configures the External I/O Expansion Unit (IOBOX).Displays the External I/O Expansion Unit settings. |
| clockboard | Sets/Displays the number of clock unit (CLKU) used when the next platform is powered on. |
| setdomparam | Rewrites the OpenBoot PROM environment variable that is compulsory. |
| getflashimage | Gets the firmware update program. |
| flashupdate | Updates the firmware program. |
| version | Displays the comprehensive firmware (XCP) version.Displays the XSCF firmware version.Displays the OpenBoot PROM firmware version. |
| prtfru | Displays the FRU-ROM data. |
| dumpconfig | Saves XSCF configuration information to the specified destination. |
| restoreconfig | Restores XSCF configuration information from the specified destination. |
| restoredefaults | Initialises the server or XSCF Unit to the factory shipping state. |
| snapshot | Saves log information to the specified destination. |
| showmonitorlog | Displays the XSCF monitoring messages on console in real time. |
| showlogs | Displays an error log, power log, event log, console log, panic log, IPL log, temperature/humidity log, and monitor message log. |
| fmadm | Monitors or controls the Fault Management Diagnosis Engines (FMDE). |
| fmdump | Dumps the fault event log containing FM diagnosis results. |
| fmstat | Displays the FMDE status. |
| unlockmaintenance | Forcibly release the locked status of the XSCF. |
| rebootxscf | Resets the XSCF. |
| who | Displays users who login to the XSCF. |
| man | Displays the man page of the specified command.You can see the list of commands by executing man intro. |
| exit | Ends the XSCF Shell. |
